UAV LIDAR/Imagery Sensor True View 410 in Rapid Response

UAV LIDAR/Imagery Sensor True View 410 in Rapid Response

by GeoCue President/CTO, Lewis Graham

What is GeoCue’s True View 410?

GeoCue’s UAV LIDAR/Imagery sensor, True View 410, is a 3D Imaging Sensor (3DIS) with bundled drone mapping processing software. 3DIS is a combination of both a sensor for creating a direct 3D point cloud as well as a sensor used to “colorize” the points. In the case of our UAV LIDAR/Imagery sensor, True View 410, the point cloud generator is a Quanergy M8 Ultra laser scanner and the colorization sensors are a pair of 20-megapixel (MP) photogrammetric GeoCue Mapping Cameras.  The complete drone mapping software, True View Evo, needed to process the data from raw collection to analytic products (visualization, classified ground, DEM, contours and so forth) is bundled with the True View 410 system.

I am a big fan of point clouds from imagery (“photogrammetric” point clouds) as obtained from applications such as Pix4D and Metashape.  We have been building support tools for these applications for years. However, (and this is the motivator for LIDAR, of course) this technique only works on non-vegetated surfaces and the data can take quite some time to process.  For example, processing 1,000 images from a 20 MP camera might take up to 6 hours of compute time, even on a fairly robust computer.  Processing a True View 410 flight of equivalent size (about 17 minutes of flight time) to the same point (a colorized point cloud) would take about 10 minutes.  This is significant!  Of course, as a bonus the colorized point cloud from the True View 410 will faithfully represent the terrain, regardless of vegetation or other ground cover.

UAV LIDAR Assessing Earthquake Damage in Puerto Rico: I2R

We have always realized the advantage of quick processing, but now a few customers are as well.  We have recently been involved in two separate operations where rapid “flight to data” was a requirement.  The first was the deployment of a True View 410 by the Civil Air Patrol (CAP) to assess earthquake damage in Puerto Rico. 

UAV LIDAR vs. Photogrammetry

One of their operational scenarios was to fly an area and immediately process the data prior to the next flight.  This would not be practical with a pure photogrammetry solution due not only to the long processing time, but also because of the nature of the object space being imaged.  Photogrammetry simply skims over the first surface of complex topologies, such as debris fields with no penetration into nooks and crannies.  The True View 410, on the other hand, provides high fidelity colorized point clouds with processing taking a bit less time than that of the collection itself.   The work in Puerto Rico was managed by one of our business partners, Innovative Imaging and Research (I2R) of Stennis, Mississippi.  I2R did not want to use a DJI drone in the operation, so we built an adapter for their Tarot T960 system.  We were able to deliver a subscription UAV LIDAR/imagery system with the custom mount to I2R in less than 5 days.  As a testament to how easy the system is to use, I2R successfully collected and processed data after learning the system with only a web session and training video. 

UAV LIDAR Assessing Severe Road Damage: Alabama Department of Transportation

Within the past week, we were contacted by the Alabama Department of Transportation to assist with imaging an area of severe road damage on Alabama 231 caused by heavy rain we have been experiencing.  We were first contacted around 11 AM and had the data collected and processed that same evening.  The value of adding colorization to the point cloud is clearly evident in Figure 1.  This is not a photogrammetric point cloud; it is True View 410 LIDAR data colorized by data from the dual integrated cameras. 

For the complete article click here

rapid response

Note – If you liked this post click here to stay informed of all of the 3D laser scanning, geomatics, UAS, autonomous vehicle, Lidar News and more. If you have an informative 3D video that you would like us to promote, please forward to editor@lidarnews.com and if you would like to join the Younger Geospatial Professional movement click here.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.