Concrete Slab Flatness Visualized with Surfer Mapping Software

November 17, 2018
|

2 min read

Surface map of Concrete Slab Flatness

This case study demonstrates the ability of Surfer mapping software to provide a highly visual understanding of concrete slab flatness.

The dreaded dead spot. Tormenting professional and recreational players alike, the dead spot can quickly wreak havoc on any indoor gymnasium event whether it is basketball, red rover, or a track event. When dribbled on a smooth surface, a ball typically bounces back quite easily; however, when the ball happens upon a dead spot, the bounce back is either greatly reduced or even changes direction. Dead spots are also noticeable when running across the floor, and the supposedly solid surface is not so solid underfoot. Injuries have been caused by these flooring distortions. Thankfully, the individuals at Mathusek Incorporated, a sports and commercial flooring contractor, have found a way to eliminate these dead spots in their floor installations by utilizing Surfer.

A sports floor is only as good as the concrete slab it rests on. One of the leading causes of a dead spot is the flatness, or lack thereof, of the slab. Prior to installing a gym floor, Mathusek offers a concrete slab assessment. Specifications require the slab tolerance to be no more and no less than 1/8 of an inch in a 10-foot radius. To verify the level, Mathusek establishes a benchmark in the middle of the floor. Readings are then taken every five feet and recorded. Each point is compared to the center benchmark to verify it is within the 1/8” requirement.

3D surface map illustrating concrete slab flatness variations for assessment and correction.
Grid Readings of Concrete Slab Flatness

The measurement readings are then fed into Surfer mapping software, and a topographic map and 3D surface map is created of the concrete slab. These maps allow installers to quickly locate areas on the concrete slab outside of the 1/8” specification range.

Chart of Grid Readings of Concrete Slab Flatness
Concrete Slab Flatness via Topo Map

By utilizing Surfer’s functionality, Mathusek, Inc. ensures their flooring installations are not impacted by a subpar concrete slab. Additionally, Mathusek has found new revenue streams as they now offer corrective services for concrete slabs that do not meet the flatness specifications. Mathusek customers can rest assured knowing their sports floors are even and free of the dreaded dead spot.

For more information click here.

Get Lidar News in Your Inbox

Weekly updates on lidar tech, geospatial industry news, case studies, and product reviews.

About The Author

Gene Roe - founder of Lidar News

NV5 GeoAgent
Stitch3D cloud strategy

Recent 3D Modeling Posts

Desert Pulse – Lidar Data Becomes Botanical Art

A stunning new art installation titled “Desert Pulse” has debuted…

March 12, 2026

High-Voltage Drone Power Line Inspection Using LiDAR

Drone power line inspections are a critical component of electricity…

March 10, 2026

Gaussian Splatting Reveals Ancient Graffiti

A team of researchers from Stockholm University and the University…

March 6, 2026

3D Modeling the Lighthouse of Alexandria

After centuries on the Mediterranean seafloor, the Lighthouse of Alexandria…

March 2, 2026
Cintoo 360 Edition Brings Ricoh 360 Data into 3D Workflows

Cintoo 360 Edition Brings Ricoh 360 Data into 3D Workflows

New solution converts 360 video walkthroughs into 3D data to…

February 17, 2026
Q3D Sensing’s AuraGO™ pocket-sized 3D reality capture device

Q3D AuraGO, Pocket-Sized Long-Range Scanner

Q3D Sensing’s AuraGO™ Creates New Category of Compact Mobile Long-Range…

February 12, 2026

Popular Posts

SAM Managed geospatial services

Get Lidar News in Your Inbox

Weekly updates on lidar tech, geospatial industry news, case studies, and product reviews.

New Compass Ranger asset extraction