SBG systems – HORIZON TO COMPLETE THE NAVSIGHT LAND/AIR SOLUTION

SBG SYSTEMS – HORIZON, THE NEW HIGH PERFORMANCE IMU TO COMPLETE THE NAVSIGHT LAND/AIR SOLUTION

SBG Systems

Carrières-sur-seine, France, January 29th 2019

SBG Systems releases at the International LiDAR Mapping Forum (ILMF) in Denver, U.S.A, the Horizon IMU, a FOG-based high performance inertial measurement unit (IMU) designed to high demanding surveying applications such as high altitude data collection, or mobile mapping in very dense areas such as urban canyons. 

Navsight Land/Air Solution consists in a powerful and ready-to-use inertial navigation solution dedicated to surveyors for mobile data collection. It is available at different levels of accuracy to meet the various application requirements and can be connected to various external equipment such as odometer, LiDAR, etc.

Horizon IMU to Complete the Product RangeNavsight Land/Air Solution already offered two levels of performance with the Ekinox and Apogee IMUs. These MEMS-based IMUs address most of surveying markets for camera or LiDAR motion compensation and data geo-referencing. The new Horizon IMU allows our customer to bring the Navsight technology to the most demanding environment such as high altitude surveying and highly dense areas as well as application where only a single antenna can be used. Horizon IMU is based on a closed-loop FOG technology which enables ultra-low bias and noise levels. This technology allows robust and consistent performance even in low dynamics survey. 

Extreme Simplicity, Easy-Peasy InstallationNavsight solution is easy to install, as the sensor alignment and lever arms are automatically estimated and validated. Once connected to the Navsight processing unit, the web interface guides the user to configure the solution. A 3D view of the vehicle shows the entered parameters so that the user can check the installation. By choosing the vehicle, a plane or a car for example, the inner algorithms are automatically adjusted to the application. The Navsight unit also integrates led indicators for satellite availability, RTK corrections, and power.

Full INS/GNSS Post-Processing SoftwareCompleting the Navsight offer, Qinertia, the SBG post-processing software  gives access to offline RTK corrections from more than 7,000 base stations located in 164 countries. The software delivers the highest level of accuracy without having to set up a base station. Trajectory and orientation are then greatly improved by processing inertial data and raw GNSS observables in forward and backward directions. 

Navsight Land/Air Solution AvailabilityNavsight is ITAR Free. All models are available for order. Ordering information and delivery time are available from SBG Systems representatives and authorized SBG Systems dealers.For more information about the new Navsight Land/Air Solution, please visit: https://www.sbg-systems.com/products/navsight-land-air-solution/

Note – If you liked this post click here to stay informed of all of the 3D laser scanning, UAS, autonomous vehicle and Lidar News. If you have an informative 3D video that you would like us to promote, please forward to editor@lidarnews.com.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.